Uncircumcised: what traction device do you recommend?

[chem101]

Hi everyone,

I am really thankful for this forum as it has a wealth of information that has really helped me. For those of you who are uncircumcised, what traction device do you recommend? Have you had issues with the PenimasterPro if you are uncircumcised? It is one of the main traction devices that I am considering.

I have mostly been reading about Restorex and PenimasterPro. Thank you!

[LuisFernandez]

I am uncircumcised and use the RestoreX with no issue. Did take some learning on how to wrap but i got it down now without any problems.
I don't have a penimaster, but i use another vacuum based traction device which is similar: https://totalmanshop.com/products/penis-extender

It works perfectly fine, I just use micropore tape and this taping method: https://www.pornhub.com/view_video.php?viewkey=ph5f45864662242

[NeoV]

Both RestoreX and PMP won't cause any issues with being uncircumcised.

[McQueen]

I am uncircumsized and use PMP, but I do have an issue on a regular basis where the frenulum attaches to the foreskin, as it often gets sucked in, and causes some temporary swelling. It does, most of the time, go down in about 30 minutes, but not always, which can make it uncomfortable to re fit after a 30 min break.

The instructions advise to ease pressure slightly, and try and pull out excess skin. Trouble is , a slight easing of pressure can often result on slipping out, or not enough easing means getting sucked back in !

It can be tricky !!

[chem101]

I really appreciate everyone's answers and the details! McQueen, that really does sound tricky! Since you mentioned PMP and the few issues, have you tried RestoreX?
I am curious

[McQueen]

Sorry, not tried it, due to difficulties in getting a hold of in the UK, and cost ....

The frustration with PMP is that one day you can get it to fit perfect, and you think thats it, you have found the right way to get it right, then the following day it just slips off !!

What does not help, I believe, is changes in temperature. The colder it gets, the more problems I get !

Cheers

[chem101]

McQueen, greatly appreciate your response! That definitely sounds frustrating! I appreciate you sharing your experience with it