Peyronies Society Forums

Peyronies Disease TREATMENT Discussion Boards => Vacuum Erection Devices (VEDs) for Peyronie's Disease => Topic started by: Newbie2 on April 28, 2013, 09:09:34 PM

Title: Need longer cylinders!!!
Post by: Newbie2 on April 28, 2013, 09:09:34 PM
Hi guys,

I have a SomaCorrect Xtra 3-cylinder VED system, which I have been using for a few weeks. When fully pumped, the head of my penis is very close to touching the negative pressure device (I mean literally 1mm away from it). I have contacted the company I bought it from, to see if they can provide me with longer cylinders. However, the only longer cylinder they can provide is the XLL cylinder, which is both longer and wider than the C cylinder I already have. My penis would not touch the sides of this cylinder. What I really want is longer versions of the A, B, and C cylinders.

Does anyone know if it is possible to get longer versions of the A, B, and C cylinders? Or alternatively, can anyone recommend me a different multi-cylinder VED system, that uses longer cylinders than the Soma?

Hope you can help me!
Title: Re: Need longer cylinders!!!
Post by: MattFoley on April 29, 2013, 04:11:11 PM
Are you just bragging?  ;)

Title: Re: Need longer cylinders!!!
Post by: james1947 on April 29, 2013, 08:27:31 PM
Newbie2

Some have made they own cylinders:
Information on Home-Constructed (or modified) VED: Inexpensive, Simple, Safe, and Effective - Peyronies Society Forums (https://www.peyroniesforum.net/index.php/topic,642.0.html)

James
Title: Re: Need longer cylinders!!!
Post by: LWillisjr on April 29, 2013, 09:08:08 PM
Try sending a PM to member OldMan
Title: Re: Need longer cylinders!!!
Post by: Norm on April 30, 2013, 10:52:09 AM
These store bought units are made to accommodate the "average" male part. If yours won't fit then you may have to get creative. Under the VED board, there are some good posts about home-constructed devices. Look closely and you will find a link to a cite that sells penis cylinders of all types and sizes. Surely you can find a tube that fits. It is easy enough then to find a good vacuum pump to attach to it. There is also a link there to some hand pumps. I bought a pump at the auto parts store that is used for bleeding brake lines. It doesn't care what it is pumping. It works just perfect. Good luck. Between those two links, you will find something that fits.
Title: Re: Need longer cylinders!!!
Post by: kuaka on April 29, 2015, 10:48:12 AM
The semi-rigid vinyl tubing I used to create mine comes in 2 foot lengths.  Hopefully, that is long enough.  :)
Title: Re: Need longer cylinders!!!
Post by: james1947 on April 29, 2015, 05:12:10 PM
Kuaka

Newbie2 was last online at May 15, 2013.
You are not expecting that he will read your post, no?

James
Title: Re: Need longer cylinders!!!
Post by: kuaka on April 29, 2015, 07:26:27 PM
For some reason it showed up as unread since last visit. I'll get the hang of this site eventually
Title: Re: Need longer cylinders!!!
Post by: james1947 on April 29, 2015, 08:56:29 PM
Kuaka

All the topics you didn't read yest will be marked as unread, more than 2000 topics, tents of thousands of posts.
Regarding:
QuoteI'll get the hang of this site eventually
It is really up to you, but personally, I will be happy you stay. :)

James