I'm somewhere between 3 to 9 months in. I still have pain during erection and especially after. I have lost girth and aittle length. Curve is slightly more to left.
Would now be safe to start traction? I really don't want to do nothing anymore.
I started traction in the acute stage and it slowed down my peyronies and also slowed down the length loss. You must use gentle force. I have the PMP and you can set it for a light pull. I do not know if you can do this with Restorex or not.
Did it help your erections? How much time do you need to use the penismaster?
It did help with my erections in hardness and nightime frequency. I generally would use it for about 6 hours
total each day. Three hours in the morning and at night.
How long until you saw results? Are the instructions easy to follow? Did a urologist oversee or did you decide on your own?
My urologist is Dr Levine and he suggested using it along with instructions of 4 to 6 hours a day.
It took about 2 monhs before I really could tell that it was helping me - slowing things down, better erections etc...
It can be a little tricky to use at first. The glans chamber is wonderful when you can master the correct sizing of it for yourself. Some guys get very frustrated and quit after 2 weeks. It took me about 6 weeks of experimenting with it to get it like clock work for me. I have posted some tips and mods to help guys out with it.
I also use Astroglide silicone gel instead of the supplied lubricant. Some guys also use castor oil.
Thank you for the great feedback. I'm going to get pmp or restorex but I'm on fence. Seems both get great results, but 30 min 2x a week with restorex is much more appealing than 4 to 6 hrs a day. Nolte says pmp is better because of his bend location, just below glans, which is mine too . Why is restorex not good for that type of bend? This is one thing holding me back from purchase
The info on Restorex correcting bends towards the glans is kind of limited. In the instructions for setting the bending length it show you to not even advance it if your bend is less than 2 inches from your tip. So it just depends on exactly where your bend is within that 2 inches. If you have the extra cash then it wouldn't hurt you to try it. I have liked the PMP and am use to it.