Topic: Is this the correct way to counter-bend using restoreX - WARNING pics included (Read 618 times)

jj21 · « **on:** April 01, 2022, 09:44:04 AM »

Is this correct? I'm able to do pretty good straight traction now its been around 12 days.

This counterbend stretch seems to target the dents i have at the base top side of my penis however it seems a bit dangerous..

Am I doing this correctly?

Mikel7 · « **Reply #1 on:** April 01, 2022, 06:00:00 PM »

Everything looks good! Yes when you first start counter bending it is kind of startling. Just make sure that you cannot see the white lines. One thing I use is a small piece of cloth that I lay where my penis touches the traction plate. It allows a smooth internal stretch and not just the skin. Time and patience is the key.

jj21 · « **Reply #2 on:** April 01, 2022, 09:58:39 PM »

Thanks man - do you mean a cloth at the start of the device around the circular blue base?

Muttley · « **Reply #3 on:** April 02, 2022, 04:06:37 AM »

How long did it take you to get to 90 degrees?

Mikel7 · « **Reply #4 on:** April 02, 2022, 05:06:23 AM »

I'm referring to the flat part of the device that includes the area that angles it down. Some guys also place some kind of a cushion at the circular base that supports everything.

jj21 · « **Reply #5 on:** April 02, 2022, 06:34:11 AM »

Muttley - its been 12 days - 3 x 30m sessions. I haven't started the 90 degree bend yet - this was just a trial I did for 1 minute to see how it would feel.

Muttley · « **Reply #6 on:** April 02, 2022, 04:07:53 PM »

Thanks JJ - as for me , I cannot imagine ever getting past two!

jj21 · « **Reply #7 on:** April 02, 2022, 11:02:45 PM »

Muttley - getting past 2 days of traction? Or two clicks? Consistency is key - I do believe it's working - my penis feels fuller and is hanging lower, some pain has also subsided. I'm almost ready to use the extension rods and start counter-bending but I will take it slow for now.

Mike - Could you please describei n a bit more detail what you mean or if you're comfortable send a pic through.

thank you,
J

Muttley · « **Reply #8 on:** April 03, 2022, 04:25:28 AM »

Oh, I was referring to getting past two clicks of the counter-bend. It brings tears to my eyes at the moment when I release the springs, despite doing it very gingerly! I think I might need a couple of weeks to get there; currently I am on day eight.
Incidentally, I think I shall be using the longer rods soon as after about ten minutes of straight traction, I am reaching the limits of the standard ones.

Mikel7 · « **Reply #9 on:** April 03, 2022, 04:29:29 AM »

When you clamp your glans in the device place a small piece of tissue ,2 by 2 inch, underneath your shaft area that is resting on the fl at plate. This allows the skin to not grab onto the plastic and you get a better internal stretch.

jj21 · « **Reply #10 on:** April 03, 2022, 04:56:29 AM »

Muttley - I'm about the same - ive maxed out tension on the straight traction - considering using the extension rods soon.

Im also cautious about doing counter-bend traction - it just seems a bit more dangerous, i'd definitely start slow. Im going to do straight traction for about another 1-2 weeks before attempting a full 15-30m counter-bend session.

It seems to be working though my penis feels fuller, hangs bettr and there is a bit less pain. Hope it works out for you too.

Mike - thank you - will give it a try - hope your treatments are working too!

Kobegianna · « **Reply #11 on:** April 05, 2022, 08:46:56 PM »

It’s been two year with no worsening. Have you been having sex in that time?

Muttley · « **Reply #12 on:** April 06, 2022, 04:36:43 AM »

Quote from: jj21 on April 03, 2022, 04:56:29 AM

Im going to do straight traction for about another 1-2 weeks before attempting a full 15-30m counter-bend session.

It seems to be working though my penis feels fuller, hangs bettr and there is a bit less pain. Hope it works out for you too.

Thanks JJ - I have reverted to Counter-bend 1 and doing that for 15 mins after 15 mins straight traction. CB 2 is a little bit too aggressive for me at the moment.

Thanks for the tip Mike!

Muttley · « **Reply #13 on:** April 08, 2022, 09:01:08 AM »

Quote from: jj21 on April 03, 2022, 04:56:29 AM

Muttley - I'm about the same - ive maxed out tension on the straight traction - considering using the extension rods soon.

I tried the longer rods today. Unfortunately, the first notch is just too far for me to start with so I returned to the standard rods and maxing out on the "final stretch" of the fifteen minute straight traction. Struggling to get past counter-bend position one as well. I suppose patience is the key for the time being.

Jamesblue · « **Reply #14 on:** April 09, 2022, 10:24:39 PM »

I found the same situation as to the need for longer rods at straight stretch,my remedy was to put some sponge rubber with a hole for my penis between the base plate and my groin.This J goextended the device and made the baseplate more comfy.

Jamesblue · « **Reply #15 on:** April 09, 2022, 10:45:04 PM »

See pic for better description of the padding out of base plate by

jj21 · « **Reply #16 on:** April 10, 2022, 06:42:32 AM »

Thanks james - that looks iike it takes a lot of the discomfort away especially from the scrotal area.

Have you seen much results?

jj21 · « **Reply #17 on:** April 11, 2022, 07:32:27 PM »

James - are you using the extra cloth that's on the hinge/bend area during straight traction too?

Jamesblue · « **Reply #18 on:** April 12, 2022, 05:27:50 AM »

Yes JJ ,
I set the cloth for the bending under the clamp and along the bed of the track then lay my penis on top then the makeup pad then clamp down one click on clamp.
All this is done along with the cloth packing at the base ring in the device initial setup for traction.
As soon as I'm happy with sufficient loose skin around the base ring I extend the rods to a position I feel tension then click the clamp on meatus to the second and final click then ever so gently release the spring tensioner and feel the full traction.
Generally I can get through 10 minutes of straight and half an hour of full 110 deg bend ( as illustrated in pic) without having to do any resetting.
I don't wish to sound like I'm bragging or kinky but I have become very familiar with the set-up and find it a painless and rewarding proceedure.
Hope others are getting good results from the device,it's not a race but a very long marathon to beat this monster of a beast.

Muttley · « **Reply #19 on:** April 12, 2022, 02:25:43 PM »

Hi James,

it would be interesting to know what your symptoms were like at the start and what they are now. Also, when did you start to see improvements? Would you mind sharing that info please?

Thanks in advance

jj21 · « **Reply #20 on:** April 14, 2022, 06:14:34 AM »

definitely agree it can be very rewarding. Just knowing that you're doing something which is having a positive effect on your peyronies makes you feel so much better mentally!

Subject / Started by	Replies	Last post
IS this the correct way to use RESTOREX?? (WARNING PIC INCLUDED) Started by jj21 Traction and Traction Devices for correcting Peyronies Disease	17 Replies 1377 Views	March 07, 2021, 02:06:16 PM by Dressa
Is this the correct way to use RestoreX? WARNING PICS INCLUDED Started by jj21 Traction and Traction Devices for correcting Peyronies Disease	7 Replies 293 Views	March 22, 2022, 10:28:54 PM by jj21
Restorex with dent at base - WARNING Pics included Started by jj21 Traction and Traction Devices for correcting Peyronies Disease	0 Replies 172 Views	April 02, 2022, 06:46:08 AM by jj21

News:

Author Topic: Is this the correct way to counter-bend using restoreX - WARNING pics included (Read 618 times)

Related Topics