pmp slips off

[renivmor]

Hi,

Got yesterday the pmp after been stuck at the customs for weeks. opened the box and saw the sluice is torn so changed it to a new one.
I have 2 problems:
1. Only at 1 of 5-6 attempts i manage to insert the glans inside the chamber completely (mainly because the balloon is stuck or if it doesn't, it doesn't create a proper vacuum force.
2. When it does  and the glans is fully inside the chamber, after a minute or two and at a very light tension the glans slips off easily.

Any ideas?

[NeoV]

Make sure your glans is slightly filled out before applying it.
Also, make sure the inner balloon sticks out a bit so the tip of your glans can basically touch it before sucking it in.

[renivmor]

Thanks Neo. filled out how?

[NeoV]

Slightly stimulate yourself, basically. The makers recommend your glans is a bit filled out and not completely small.

[renivmor]

worked!! thanx a lot  

[sky43diver]

Hi there, some tricks i have learned since starting PMP 7 weeks ago:
- Ensure that the air is out of the Glans chamber by fitting the hand pump and turning left and right - you will hear any trapped air release.
- Ensure that the rotary valve that screws onto the glans chamber that fits onto the hand pump is tight (left hand thread).
- If you don't fill the glans chamber with the glands first pump then release the pump (re-squeeze to suck more air in and re-attach to the glans chamber and turn it to the left and the vacuum will pull in the rest of your glands.
- I love the leg strap, however if you are going shopping or venturing outside at all, ensure that you have the pump to release it if you need to pee.....have been caught out by the already

Good luck!

[Mikel7]

The green hose connection will give you a lot more control over the suction right now. First learn how to use that before
moving on to the bulb.